Parts

Developed and designed entirely by CeramicSpeed, the Oversized Pulley Wheel (OSPW) System for Shimano 9000/6700 provides the ultimate optimization of your bicycle's drivetrain. This OSPW System features a set of 17-tooth aluminium Pulley Wheels, available in red and black, housed in a specially designed polyamide (PA) and carbon cage. The upper and lower 17-tooth oversized aluminium pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. The Oversized Pulley Wheel (OSPW) System is the product of choice by many of the world's leading cycling teams and triathletes. This specific system is compatible with Ultegra 6700/6770/6800/6870 mechanical and Di2 rear derailleurs and Dura Ace 7900/7970/9000/9070 mechanical and Di2 rear derailleurs. Tech Data: The overall power savings of the OSPW System for Shimano 9000/6700 reach 30%-60%, or more in some cases, over a stock setup. The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market. The OSPW for Shimano 9000/6700 is not compatible with Shimano Dura-Ace 9100/9150 and Ultegra 8000 series rear derailleurs. For those rear derailleurs you will need a OSPW System for Shimano 9100 series. In The Box A complete 17-tooth OSPW System CeramicSpeed bearing oil in 10ml dropper bottle Oxygen.Vorto.Model.VortoContent`1[System.String]

Cycling power meter with sensors on both pedals. The best choice to take full advantage of the real dual-sided measurement. Specifications Power sensors on both pedals Dual-sided power measurement Cadence sensor: included, inbuilt Gyroscope: included, inbuilt Power calculation system: IAV (Instantaneous Angular Velocity-based) IAV Cycling Dynamics: yes Oval-chainring compatible: yes Total weight per pedal: 151,5 g (battery included) Battery type: rechargeable lithium battery Battery life: at least 50 hours Radio communication: Bluetooth v4.0, ANT+ PWR profile (CT + PO) Accuracy power measurement: ± 1% Temperature compensation: -10°C / +60°C Waterproofness rating: IP67 Q-factor: +54mm Compatible cleats: Original LOOK Kéo and Favero cleats (red and black) Bike type: road Made in Italy Warranty: 2 years Package content Left pedal with power sensor Right pedal with power sensor Battery charger including plugs (EU, US, UK, AU) 2 two-meter long micro-USB/USB cables with 2 magnetic connectors 2 red cleats 6°float (LOOK Kéo compatible) Hex key and 4 washers for the installation User manual

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors: CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

- Aheadset preload adjusting bolt

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Shell: 8mm flanged axle nut - Flanged

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

Allows mounting of mono or duo Blendr Mount to Trek Madone SLR or one-piece Handlebar/Stem. - Corrosion resistant - Blends seamlessly

Keep your elbow pads in place. - Necessary for proper assembly - M4 x 10mm

Champion 2.0 Black Spokes - One 264mm spoke = 7g

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Heavy duty and extra wide PVC rim strips for maximum tube protection.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

The Gyro G3 upper top plate is designed for use with the G3 detangler.

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Bar end plugs (2)

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

FSA Mega Exo Small Parts.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

BB30 Spacer - 15.46mm

- Brake casing has internal lining and external plastic coating - Length: 30m

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each

Shimano Front Derailleur Cable Fixing Assembly

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Campagnolo front derailleur parts for repairs.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing

The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length

- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating

Complete remotes and remote components for KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Campagnolo small parts for bottom brackets.

Replacement parts and extra supplies for the EnCase System. Bacon Strip plugs store inside handle of the EnCase System Chain + Tire Plug Multi-Tool. The Presta Valve Core and Presta to Schraeder adapter and Master Links store in EnCase System Storage Sleeves bonus area.

Replacement parts and extra supplies for the EnCase System. Bacon Strip plugs store inside handle of the EnCase System Chain + Tire Plug Multi-Tool. The Presta Valve Core and Presta to Schraeder adapter and Master Links store in EnCase System Storage Sleeves bonus area.

The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

- Each box contains 20 patch kits - Each kit contains 6x Glueless Patches (0.98''), 1x Sandpaper - Travel Size—Can be kept inside a jersey pocket, tool bottle or saddle bag!

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex